Clippercide 5-in-1 clipper spray, 15 ozSingle can$16.99
$16.99 per can
4.8 of 5 across 10,099 ratings
The 5-in-1 clipper spray
One aerosol can that handles five jobs on your blades
From the makers of Barbicide, we make Clippercide to disinfect, lubricate, clean, cool and prevent rust in one step. It has sat on barbershop back bars, salon stations and grooming tables for decades, sprayed directly onto blades after each use.
EPA-registered disinfectant
Our formula is bactericidal, fungicidal, virucidal and tuberculocidal, proven on the label to kill HIV-1 and TB.
Board-ready standards
This spray keeps your grooming tools within strict health and safety standards between services on the back bar.
One aerosol, 5 jobs
A single 15 oz can disinfects, lubricates, cleans, cools and prevents rust on your running blades after each cut.
One can, five jobs
The 5 jobs of the spray
We make one can to replace five separate steps at the back bar, salon station or grooming table. A single 15 oz aerosol handles the entire turn between clients.
Disinfects
EPA-registered hospital-grade formula that is bactericidal, fungicidal, virucidal and tuberculocidal, proven to kill HIV-1 and TB on clipper blades when left wet for 5 to 10 minutes.
Lubricates
Leaves a light film of lubricant directly on the metal, which keeps blades running smoother and quieter throughout a full day of cuts.
Cleans
High-pressure aerosol spray blows loose hair, dirt and debris out from between the teeth so you do not have to take the blade set apart.
Cools
Cuts the heat and friction a running blade builds up during heavy work, cooling the steel quickly between services at your chair.
Prevents rust
Guards against corrosion between cuts. The protective lubricant film left behind prevents rust on your cutting edges and keeps blades sharp.
The catalogClippercide 5-in-1 clipper spray, 15 ozSingle can 
Clippercide 5-in-1 clipper spray, 15 oz, pack of 2Pack of 2
Clippercide 5-in-1 clipper spray, 15 oz, pack of 3Pack of 3
Clippercide 5-in-1 clipper spray, 15 oz, pack of 6Pack of 6
Our 15 oz can in four pack sizes
We make one 15 oz aerosol can. You can buy it as a single can or in packs of 2, 3 and 6, depending on how fast your stations go through spray.
Clippercide 5-in-1 clipper spray, 15 ozSingle canClippercide 5-in-1 clipper spray, 15 oz, pack of 2Pack of 2$27.99
$14.00 per can
4.8 of 5 across 10,099 ratings
Clippercide 5-in-1 clipper spray, 15 oz, pack of 3Pack of 3$34.99
$11.66 per can
4.8 of 5 across 10,099 ratings
Clippercide 5-in-1 clipper spray, 15 oz, pack of 6Pack of 6$54.99
$9.17 per can
4.8 of 5 across 10,099 ratings
The formula is the same in every listing. Per-can cost runs from $16.99 for a single down to $9.17 in the pack of 6.
Label directions
How to use Clippercide on your blades
Clippercide does all 5 jobs only when you follow our label directions. Most people spray and wipe right away, but the blades must stay wet for 5 to 10 minutes to reach full hospital-grade disinfection.
- Clear
Blast the spray through the teeth first: the pressure blows out hair and debris a brush cannot reach.
- Coat
Spray straight onto the blades after each use.
- Wait
Leave the blades wet for 5 to 10 minutes: that is what full disinfection takes.
- Wipe
Wipe off the excess and the clipper is ready for the next chair.
Four kinds of chairs
Who reaches for the can
We make one 15 oz aerosol for the stations where metal blades work all day. It sits by the chair and the table to disinfect, cool and lube between cuts.
Barbers
Faders, tapers and trimmers between back-to-back chairs.
Read the guide →Stylists
Detailers, edgers and shears running warm on the floor.
Read the guide →Pet groomers
Heavy-duty clippers clearing matted coats and dander.
Read the guide →Vet clinics
Surgical prep blades needing EPA-registered label claims.
See the label →Count how many cans your shop goes through
Put in your number of stations and how long a 15 oz can lasts at one chair. We will total the monthly order for your shop without guessing.
From the ratings
What the stations say
Here is what working barbers and groomers say about keeping our 15 oz can on their stations between cuts.
Treat your clippers and health
Keeps your clippers sharp, well lubed and clean; it has antifungal properties. It is worth the money
PEJAGANAExcellent Product
Product recommended to me by my hair stylist. Works fantastic at protecting, cleaning and lubricating my beard trimmer.
HunterEssential for Clipper Maintenance
This is the best product for cleaning shaving heads. It effectively cleans and lubricates in one step, making it incredibly easy to use. Highly recommended for keeping your equipment in top condition.
Thomas PhelanStraight answers
Questions about Clippercide
We make one 15 oz can for the back bar and grooming table. Here are the answers to the questions barbers, stylists and groomers ask us most often about what is inside.
Do I still need clipper oil if I use this spray?
Clipper oil only lubricates. Our spray lubricates, but it also disinfects, cleans, cools and guards against rust between clients. The two are not rivals, because the spray handles the routine between services.
How long do the blades need to stay wet after spraying?
Blades stay wet for 5 to 10 minutes before you wipe off any excess. That wet time is what the label calls full hospital-grade disinfection. It gives the formula time to do its job on the metal.
What organisms is this spray proven to kill on blades?
Our EPA-registered formula is bactericidal, fungicidal, virucidal and tuberculocidal, proven to kill HIV-1 and TB. Those are the exact claims on our label. We do not test or list anything beyond that.
Will using this satisfy state board health standards?
It keeps grooming tools within strict health and safety standards between services. The formula handles the sanitation requirements barbers and stylists face every day. Regular use keeps your station compliant.
Can I use this on a home hair clipper?
The label addresses professional barbers, stylists and pet groomers, but the routine is identical on a home machine. A single 15 oz can is the right size for home maintenance. It keeps personal blades clean and sharp.
Which pack size should I order for my setup?
A single 15 oz can is right if you want to try it out on one machine. We offer packs of 2, 3 and 6 for shops where more than one station sprays throughout the day. Every can holds the exact same formula.
Chairside notes
All the notes →Guides for the station and table
We put together short guides on the routine between clients, how the spray compares to clipper oil, and using clippers on pet grooming tables.
The clipper routine between two barbershop clients
A practical guide to clearing, coating and the 5 to 10 wet minutes needed to keep clipper blades within health and safety standards between services.
Keep reading →Clipper oil and aerosol spray at the station
A bottle of plain clipper oil lubricates moving steel, while our 15 oz aerosol spray covers lubrication alongside cleaning, cooling, rust prevention and hospital-grade disinfection.
Keep reading →Clippers on the grooming table
Dense animal coats pack clipper teeth and generate heat fast, making regular cleaning, cooling and disinfection essential between grooming services.
Keep reading →On the back bar
Keep a can on your station
We make one 15 oz can, available on its own or in packs of 2, 3 and 6. Set it by your clippers, spray the blades after each service, and let the formula do the five jobs it has handled for decades.